Apr 24, 2009

Card Holder Key Chain Tutorial



These are very simple to make, it took me longer to put the tutorial together then it did to make the five key chains in this tutorial. I took lots of pics, but these are easy to make and anyone can do it. The monogram is optional. You can embellish these anyway you like and you might even choose to fussy cut certain fabrics. I made 70 of these monogrammed and used snaps for closures but wasn't happy with the snap. So, I started all over and made them 70 more with Velcro. I'm happy with the Velcro so that's what we'll go with here. But If you are better at setting snaps then I was you can give that a go. Just do what works best for you. You also have option for what to use for the piece that holds the ring. I used the fabric and sewed it just like making double fold binding but you could choose to use ribbon or even the straps the Moda uses to wrap their bundles in would work nicely and make great use of something that might otherwise gets thrown out. So lets get to it.

Here's what you need:

2 pieces of your fabric cut 3"x5 1/2"
1 piece cut 3"x8"
1 cut 3"x3" (you won't need this if you use ribbon or something else for the ring strap)
hook and loop Velcro cut to 1 1/4" or snap
metal keyring (I bought mine in the craft section at WM)
monogrammed square optional

Here's a few tips that I learned along the way.
Ironing embroidery thread will melt it. I never thought about it being synthetic when I made that mistake. So, my second tip is that the Velcro would probably melt too, luckily I didn't make that mistake too. I suggest covering with a cloth before pressing with an iron.
One more thing I used a 1/4" seam allowance.

Start by cutting your fabric and Velcro pieces. I did mine by cutting a 3" strip of the with of fabric (selvedge to selvedge) then from that I cut the two 5 1/2" pieces, one 8" piece and one 3" piece from the strip to get the four pieces needed for one key chain.
Now we want to fold the 8" piece wrong sides together and give it a press with the iron. You will also fold the 3" piece wrong sides together and give that a press to, but you need to turn the raw edges of that into the center fold just like if you were making double fold binding, press again. It should look like this. If you see extra pieces in there don't let that confuse you. I was making 5 of these at the time I took the pics.
Now we need to draw a line down the center, length wise of the 5 1/2 piece. This will be a guide to place the ruler so you get your corners cut off straight. OOPs, forgot to take pic so had to run back and grab some fabric to show what I mean, so ignore that this piece of fabric is different. But it still gives you the right idea.
Now the next step is the reason for the line. You will need to cut the corners off the two 5 1/2 " pieces. So, line the diagonal line on your ruler up with the center line on your fabric making the top of the ruler line up with the 1" mark on the ruler(note that the ruler is hanging over the top at the 1" mark). I stacked all mine so I could cut them all at once. Cut the two corner pieces off. Now all your pieces are ready to go to the sewing machine. This is what you should have. Two 3x5 1/2" with the corners cut off, one 3x8" folded in half and pressed and one 3x3" folded and pressed like double fold binding. If you are doing monograms you'll need those cut in small squares and ready also.Now the next step is only for the monogram, so if you're not doing a monogram then just skip this step. Place your little monogrammed square on one of the pieces that have the corners cut, center it as best you can. You might want to measure, I just eyeballed mine. Then I did a satin stitch on the edge all the way around in the same color thread as the monogram. I did do a couple with rick-rack around them and then stitched it down but you do it the way you like best!!
Now take the OTHER piece that has the corners cut off and sew the Velcro to it (if you choose to use a snap skip this step). Line it up between the two top points and down 3/8" from the top. I used a very narrow satin stitch all the way around. So if you used the hook part of the Velcro for this use the loop part for the other piece which will be now sewn to the folded piece on the end that has the fold. It too will be centered and down 3/8" from the fold. These are the ones on the right side of the pic. Next we will sew down both sides of the small 3" piece that we pressed with the double fold. This will be to close and the other side just for looks. I sew the open side first and then back down the other side. Once those are sewn I insert them into the metal rings and line up the raw edge and sew a stay stitch down to hold the ring in place. These will be sewn to the folded piece on the same side as the Velcro but opposite end. I back stitch here to make sure these are secure and don't pull lose. Now you should have these three pieces. I have 15 because I made 5 at once. One with monogram (or plain), one with Velcro and the folded piece with Velcro and ring attached. We're almost done. Now, take the folded piece with the ring and lay it directly on top of the Velcro piece that has the corner cut, both facing up. Lining up the bottom edges, like this. Now lay the monogrammed piece (or plain piece if you choose not to add a monogram) right side down on top of that. Making sure all the edges are all lined up. I pinned my 3 layers so I didn't have to worry about anything shifting. Starting on the bottom (short straight edge sew up the long side. I back stitch at the beginning and end so your stitches don't come loose when turning. Sew all the way around to the the other end. This is what you'll have. Now here is the tricky part. Not hard but tricky because if you don't have it turned right before sewing the bottom seam well it just won't work right. So when you look in the bottom where it is still open you will see the two other pieces and the middle one with the metal ring one it. Turn your piece from between the side of the middle that doesn't have the ring sewn to it and the outer fabric. If you click the pic you will get a close up and see the arrow pointing to where you need to turn the piece thru. Once it is turned it will look like this on one side(top one) and this (bottom one) on the other side. I know this doesn't look right, but it is. Go ahead and give it a press on the side that doesn't have the velcro. I was afraid the velcro might melt. Next sew a seam across the bottom to close. I backtack at the start and finish here too. Snip those corners to eliminate bulk. Reach in and pull the ring out to turn. After pushing those corners out you will want to give it another press with the iron. That's it, enjoy!!!

38 comments:

  1. Oh my gosh...this is wonderful. I love these. You did such a great job with this tutorial, very clear instructions and the best photos. The fabric is adorable. What line is that from?
    Thanks so much for sharing,
    ~Karen~
    ps would it be ok if I linked to your blog in the next day or two?

    ReplyDelete
  2. Wow! Those are very nice! They would really make great gifts! You also did a wonderful job on a detailed tutorial too!!
    Kristie

    ReplyDelete
  3. Absolutely darling and a very fine tutorial, indeed! What a wonderful gift to give to friends and family! I'm saving this one in my favorites file!

    ReplyDelete
  4. I also love the tutorial. I plan to bookmark it so I can go back when I am able to get back to sewing. Just one thing - can I have your permission to make these to sell at craft fairs? They would be a great addition for me - but since the pattern is your's I need the permission to use it.

    ReplyDelete
  5. WELCOME HOME DONNA! I know you didn't get in until the wee hours of the morning but can't wait to see all the photo's!

    ReplyDelete
  6. Donna, you are AMAZING!!!! LOVE the tutorial and I'm honored to be the owner of one of your Card Holder Key Chains.

    It was very nice to meet you at the COF Retreat. You are so talented, your sewing is amazing. Keep posting, I read your blog for inspiration.

    Hugs
    Jody (CQwannabe)

    ReplyDelete
  7. That's a great tutorial - very detailed. I love your fabric choices and am having a great time looking around your blog.

    Gwendie

    ReplyDelete
  8. love your tutorial. thanks for sharing.

    ReplyDelete
  9. Awesome little gifty idea! Thanks for sharing! 8-)

    ReplyDelete
  10. This is wonderful. I made one and it's so cute. Do you mind if I post a link to your blog on my blog? Thanks for sharing this tutorial.
    Vera

    ReplyDelete
  11. I pray GOD truely blesses you for sharing this information. Very helpful. Great instructions.My daughter had one and I wanted one now I do thanks to you.
    Teresa in Tennessee

    ReplyDelete
  12. Thanks for a great tutorial on your cute key chain..

    ReplyDelete
  13. I've literally been working on making myself something to just hold my license, debit card & mine & the 3 kids health insurance cards for the last 5 hours, no luck. Then I saw your tutorial & tada! viola! I'm so excited! It worked & looks beautiful & wow! Thank you so very much, you made my day! (& in about an hour)

    ReplyDelete
  14. I just found this awesome tutorial today @ TipNut!! This is just such a great idea, I love the fabrics you chose too!

    ReplyDelete
  15. I found this tutorial while looking for something else and was glad I did :) I just made these with your tutorial - thanks for making it :) http://magical.imgur.com/other_craft_and_sewing_projects#ylfDL

    ReplyDelete
  16. OMG..THANKS A LOT I.LOVE THAT TUTORIAL..I GLAD N DONE ALREADY,MAY I LINK TO MY BLOG..AS PLEASURE...

    ReplyDelete
  17. I have just finished making some of these as gifts - they are wonderful. Your tutorial was easy to follow, and I cannot seem to stop making them
    Thank you
    Judy

    ReplyDelete
  18. Got your link from Judy at CatNCart Craft. She did a great job on hers. Your tutorial is great. Thanks.

    ReplyDelete
  19. I also got the link from Judy & am so impressed! Your tutorial was so clear & concise. Thanks so much for sharing.

    ReplyDelete
  20. I just love this idea! Made my first one! Thank you! _ Paula Luberts

    ReplyDelete
  21. Love your keyring. Thanks for sharing your tutorial. Posting a link to it on my blog...kwiltypleasures.blogspot.com.

    ReplyDelete
  22. So pretty! Thank you for sharing this tutorial! ~tina

    ReplyDelete
  23. Fantastique!!!!!thank you!!!!

    ReplyDelete
  24. YEAH! My friend and I just completed your tutorial - making one first and now I am off to cut more fabric to make more! Great tutorial! Thanks for taking the time to share your wonderful gift!

    ReplyDelete
  25. these are wonderful and the tutorial is easy to follow..thanks for sharing it with us as i might need it when use this design for Metal business cards.

    ReplyDelete
  26. I have made several of your wonderful card holder keychains for gifts and they are a big hit, I LOVE mine! It has freed me from wagging a purse around when I go shopping, THANK YOU SO MUCH!!!
    SharonTx

    ReplyDelete
  27. Thank you for good idea and tutorial. :)

    ReplyDelete
  28. thanks it will nice xmas gift for co-workers.

    ReplyDelete
  29. It WORKED! Fabulous tutorial. Fabulous finished product. Thank you.

    ReplyDelete
  30. I have to say this is great but the down side is what if you loose your keys and then you have lost all or some of your credit cars along with it and possible usage that someone would do with the cards. Nice for those who are responsible with there keys. for sure.

    ReplyDelete
  31. Can these be used as luggage tags? I'm thinking this would be a cute wedding shower gift.

    ReplyDelete
  32. One could insert a clear plastic window on the side where you have the monogram. Driver's license or other ID could be seen without removing it. Thanks for the tutorial.

    ReplyDelete
  33. Very interesting topic and i really like your all information well done.

    5 Multi Tools

    ReplyDelete
  34. Wow. Có những chiếc móc khóa được làm từ những thứ rất đơn giản...

    ReplyDelete
  35. Thank you so much for a great tutorial

    ReplyDelete
  36. i really wish you would do a youtube tutorial of this keychain holder
    maryknowsbest1@att.net

    ReplyDelete

Thank you for your thoughts

FEEDJIT Live Traffic Feed